Liquid Hardware

Shanks

Install through a wall or refrigerator door to mount a faucet. Requires a beer faucet on one end, and a wing nut, tail piece, and washer on the other (see below).

#K138	Beer Shank - Chrome Plated 3" x 3/16" bore		$11.99 EACH
#K139	Beer Shank - Chrome Plated 4.125" 3/16" bore		$14.50 EACH
#K140	Beer Shank - Chrome Plated 5.125" 3/16" bore		$17.50 EACH
#K166	Beer Shank - Stainless 4"		$20.99 EACH
#K167	Beer Shank - Stainless 6"		$20.99 EACH

4-inch Plastic Shank for Wine

If you are dispensing wine, you should use a plastic shank.

#K270

Wine Shank - 4" Plastic

$34.99 EACH

Plastic Shank Flange

Replace the flange on your shank.

#K208

Plastic Flange for Beer Shank

$2.50 EACH

Stainless Shank Flange

Replace or upgrade the flange on your shank.

#K207

S/S Flange for Beer Shank

$3.50 EACH

Faucet Coupling Nut

Replacement for the coupling nut on a standard beer shank. Or use it with the Faucet-to-Disconnect Adapter (K164) below. The threads mate with a standard beer faucet.

#K165

Faucet Coupling Nut - nickel plated

$3.50 EACH

Faucet to Disconnect Adapter

When used with a faucet coupling nut (K165), this fitting allows you to attach a beer faucet directly to a homebrew keg disconnect. One side of this faucet has a 1/4" female flare attachment, the other side mates with a beer faucet. (Incompatable with Perlick forward-seal faucet, K181)

#K164

Beer Faucet to Disconnect Adapter

$9.99 EACH

Tap and Shank Accessories

Tail Pieces. Tail pieces fit inside a beer nut (K018 or K087), and are sealed to shanks or keg couplers with a neoprene beer washer (K030). All tailpieces (except our stainless tail piece) are made of chrome-plated brass. The size of the tail piece indicates the size of the hose barb.

#K214	Tail Piece 1/4" Stainless		$2.25 EACH
#K196	Tail Piece 3/16"		$0.90 EACH
#K019	Tail Piece 1/4"		$0.90 EACH

Bent Tail Pieces. Tail pieces fit inside a beer nut (K018 or K087), and are sealed to shanks or keg couplers with a neoprene beer washer (K030). All tailpieces (except our stainless tail piece) are made of chrome-plated brass. The size of the tail piece indicates the size of the hose barb.

#K240	Tail Piece - 90 degree 3/16"		$5.99 EACH
#K241	Tail Piece - 90 degree 1/4"		$7.99 EACH

Tail Piece with 1/4" MFL connector. Fits inside a hex nut or wing nut (above). Instead of a barb, it provides a 1/4" MFL connection, so you can easily change between commercial kegs and homebrew kegs.

#K027

Tail Piece 1/4" MFL

$6.50 EACH

Beer Nuts. Beer nuts thread onto shanks and keg couplers. They are used in conjunction with a tail piece and a #K030 Neoprene Beer Washer. Our beer nuts are available in two styles: a hex nut, which can be tightened with a wrench, or a wing nut, which can easily be tightened by hand.

#K018	Beer Shank Hex Nut		$1.05 EACH
#K087	Beer Shank Wing Nut		$3.75 EACH

Neoprene Beer Washer. Required wherever you use a tail piece.

#K030

Black Neoprene Beer Shank Washer

$0.15 EACH