Kegging Equipment for Home Brewing

An economical and effective faucet head. Valve opens when squeezed. Simply attach the barbed end to our beverage tubing; no hose clamp is needed!

0-2000 PSI gauge with left hand threads. Teflon tape recommended for installation. The regulator gauge measuring pressure in the tank does not meas...

0-60 PSI gauge with right hand threads. Teflon tape recommended for installation.Proposition 65 Warning for California Consumers: This product cont...

Reusable stainless steel perforated band clamps to crimp beverage tubing to barbs. Turn Key Clamp fits 3/16, 1/4 ,or 5/16 ID beverage tubing. This ...

Reusable stainless steel perforated band clamps to crimp beverage tubing to barbs. Turn Key Clamp fits larger OD beverage and thermoplastic tubing,...

Reusable perforated band clamps to crimp bev tubing to barbs. #2 clamp fits larger OD beverage and our thermoplastic tubing. Requires a small flat ...

Reusable perforated band clamps to crimp bev tubing to barbs. #1 clamp fits 3/16, 1/4, or 5/16 ID beverage tubing. Requires a small flat head screw...

The clamps we use on our keg tubing kits. No.145 fits 3/16" and 1/4" ID beverage tubing/barbs. Stainless steel ear clamps are easy to install, and...

The clamps we use on our keg tubing kits. No.170 fits 5/16" ID beverage tubing/barbs. Stainless steel ear clamps are easy to install, and securely...

Stainless-steel tail piece with 3/16" barb for connecting standard 3/16 ID beverage tubing to a beer shank or sankey coupler. This is the ideal siz...

A stainless steel tailpiece with 1/4" MFL fitting for quick connection to any diameter beverage tubing that is equipped with a barbed swivel nut. T...

Stainless, 1/4" barb.

Install this insert with standard faucet-handle threads to make just about anything into a tap handle. Make your own tap-handle by drilling a 1/2" ...

Inexpensive option to split a gas line. Install 1/4" MPT port into a regulator body, and add two check valve (K125) or shutoff valves (K038 or K039...

Easily clean multiple tap ball lock kegerators or keezers with our ball lock jumper post.  Jumper between all your beer lines and without removing ...

This acid based, non-foaming final rinse* is used by many brewers who prefer the non-foaming action for their fermenters, serving tanks, part soaki...

The all stainless 1/4" MFL (Male Flare Thread) to 3/8" Barb piece is useful for connecting tubing with female flared fittings (barbed swivel nuts) ...

Vinyl sleeve fits over the nozzle of most beer faucets to eliminate drips while not in use.

Please note: These kegs make a long journey from Germany and as result, many arrive with small dents. These are of no cause for concern and do not ...

This is just the tap unit for the Party Star Deluxe mini keg system. Sometimes things happen and you just need a replacement.  

5L Mini Kegs are great because more kegs = fewer bottles! This mini keg is a compact and portable system, and perfect for draft beer. You will also...

The 2 piece Rubber Mini Keg Bung is a reusable bung that is used to seal the mini keg when carbonating your beer. After 2 -3 weeks of carbonation t...

Reusable bung for mini kegs. Allows for carbonating, tapping, venting, and controlling air moving into the mini keg during dispense.  The 3-piece s...

Black Lexan replacement CO2 Hand Wheel aka "knob", that works with any of our CO2 cylinders.