Fermenters & Accessories

Handle for use on 3, 5, 6 and (non-acid style) 6.5 gallon glass carboys. Clamps beneath lip and reduces the danger of dropping a wet carboy. Carboy...

Reusable stainless steel perforated band clamps to crimp beverage tubing to barbs. Turn Key Clamp fits 3/16, 1/4 ,or 5/16 ID beverage tubing. This ...

Reusable stainless steel perforated band clamps to crimp beverage tubing to barbs. Turn Key Clamp fits larger OD beverage and thermoplastic tubing,...

Holds your auto-siphon in place during racking, allowing you to set the tip above the level of the sediment and walk away. Easy to clip on to bucke...

Holds your siphon in place during racking, allowing you to set the tip above the level of the sediment and walk away. Easy to clip on to buckets an...

Fits 6.5 gallon glass acid carboys. Put a racking tube through the center spout, fit the cap over the mouth of the full carboy, then blow hard into...

The first-ever universal lid for Big Mouth Bubbler® fermentors. Engineered by brewers to suit any fermentor in the Big Mouth Bubbler® family, from ...

The first-ever universal lid for Big Mouth Bubbler® fermentors. Engineered by brewers to suit any fermentor in the Big Mouth Bubbler® family, from ...

Fits our drilled 6.5 gallon bottling and fermentation bucket, as well as the Siphonless Big Mouth Bubblers® Rubber gasket goes on the outside of t...

With the Grainfather Pressure Transfer Connection, transferring your beer from the fermenter has never been easier. Simply attach to the Grainfathe...

This reusable 38 mm screw cap will fit our 1 gallon, 1/2 gallon jugs, and beer growlers. It is made of plastic and has a hole in the middle, which ...

Lid for our 7.9 gallon fermenting bucket. Includes a grommeted hole for an airlock and a rubber gasket for optimum seal.

4.5" diameter food-grade plastic funnel fits beer bottles or flasks.

Used to provide a positive seal on your carboy. Top Diameter: 1.26" Bottom Diameter: 1.024" Not sure if this is the correct stopper for your purpos...

Used to provide a positive seal on your carboy. Drilled hole is compatible with standard airlocks. The #6.5 stopper works well with our glass carbo...

One stroke of the racking cane/piston assembly will start a siphon when immersed in as little as six inches of beer or wine; less than six inches m...

One stroke of the racking cane/piston assembly will start a siphon when immersed in as little as six inches of beer or wine; less than six inches m...

Replacement Grommeted Lid for our 2 gallon bucket/fermentor. Note: Lids are intended for single use. Removal of the tearaway strip causes the lid t...

Fill with water and insert in drilled stopper or bung to vent gases during fermentation. Includes body, piston, and vented cap. This airlock is eas...

Fill the Bubbler Airlock with water and insert in drilled stopper or bung to vent gases during fermentation. "Bubbler" style airlock makes a gratif...

The 2 piece Rubber Mini Keg Bung is a reusable bung that is used to seal the mini keg when carbonating your beer. After 2 -3 weeks of carbonation t...

Reusable perforated band clamps to crimp bev tubing to barbs. #1 clamp fits 3/16, 1/4, or 5/16 ID beverage tubing. Requires a small flat head screw...

FermagraF°®, the newest innovation of thermometers. Round for easy placement on the Big Mouth Bubbler® or your fermenter of choice. Bright blue c...

Large food grade plastic funnel designed with a shape that helps minimize splashing. Fits carboy necks.